PETG 3D Printing

When a part actually has to do a job, choose PETG. It prints almost as easily as PLA but adds the strength, chemical resistance and durability of engineering plastics, ready for real-world use indoors and out.

Note 1. Typical filament values. Your part depends on design and settings.

MaterialPolyethylene Terephthalate Glycol
Print Temperature220-250°C
Bed Temperature70-80°C
Density1.27 g/cm³
Flexural Strength69 MPa
Glass Transition88°C
GradeBest for functional parts

Why choose PETG

  1. 1.High strength with excellent impact resistance
  2. 2.Better moisture and outdoor tolerance than standard PLA
  3. 3.Good layer adhesion for sturdy functional parts
  4. 4.Higher heat tolerance than PLA, with glass transition around 88°C
  5. 5.Available for practical brackets, enclosures and workshop fixtures
  6. 6.A good middle ground when PLA feels too brittle and TPU is too flexible

What teams print in PETG

Reach for PETG whenever a part needs to survive stress, heat, moisture or chemicals.

  • 01Functional parts and mechanical components
  • 02Brackets, mounts and load-bearing fixtures
  • 03Outdoor and UV-exposed parts
  • 04Protective enclosures and housings
  • 05Tool organisers, storage parts and workshop helpers
  • 06Automotive and workshop jigs

Should you choose PETG, PLA or TPU?

PETG is the practical middle option: tougher than PLA, more rigid than TPU, and a strong fit for useful parts.

AChoose PETG when
Your part needs to be tougher than PLA, handle moisture better, or survive regular handling as a functional piece.
BChoose PLA instead when
The part is mainly decorative, a quick prototype, a miniature, or a display model where stiffness and low cost matter more than toughness.
CChoose TPU instead when
The part needs to bend, grip, compress, seal or absorb impact. PETG is tough, but it is still a rigid material.

PETG printing questions

Is PETG the right material for my functional 3D printed part?

PETG is usually a strong fit for brackets, mounts, enclosures, jigs and outdoor-use parts where PLA may be too brittle. Upload your STL and we can confirm whether PETG makes sense for the geometry and use case.

Is PETG better than PLA?

PETG is better for tougher functional parts, moisture exposure and higher heat tolerance. PLA is still better for low-cost prototypes, display pieces, miniatures and parts where fine surface detail matters most.

Can Mold & Matter print PETG for outdoor parts?

Yes, PETG is a practical choice for many outdoor and workshop parts. Final suitability still depends on the shape, load, colour, exposure and expected lifespan, so we inspect every uploaded model before printing.

Ready to print in PETG?

Upload your STL, choose PETG, and get an instant quote. We inspect every order before printing, so if another material is a better fit, we can point you there before production starts.

See our 3D printing service details

Get instant quote