3D printed jigs and fixtures for the shop floor

Jigs, fixtures, gauges and assembly aids are some of the most useful parts you can 3D print. Here is how to choose materials, design them to last and know when metal is still the answer.
Published
UpdatedNot revised
Reading time5 min
CategoryManufacturing
Written byThe Mold & Matter team

Every production line has a drawer of improvised tooling: a wooden block that holds a housing during gluing, a bent sheet-metal guide for drilling, a cardboard template for label placement. These aids work, but they wear out, are hard to replicate and rarely get documented. 3D printed jigs and fixtures replace them with parts that are designed in CAD, printed in days and reproduced exactly when the next one is needed.

This guide is for manufacturing engineers, line supervisors and procurement teams. It covers what these tools are, why FDM suits them, how to choose material, how to design them to survive daily use and when machined metal is still the better option.

Jigs, fixtures, gauges and assembly aids

The terms overlap on most shop floors, but the distinctions help when you write a brief:

  • Jig: guides a tool to the work. A drill jig positions the bit; a router template guides a cutter along a profile.
  • Fixture: holds the work in a fixed position while an operation happens. Gluing, soldering, inspection and light machining fixtures are common.
  • Gauge: checks a dimension or feature quickly. Go/no-go gauges, profile templates and hole-position checkers fall here.
  • Assembly aid: anything that helps an operator put parts together correctly. Nests, alignment pins, cable-routing combs, label placement guides and part trays.

What they share is low volume, high variety and frequent change. A new product variant or a line rebalance often means new tooling, and that is exactly where machined tooling is slow and expensive.

Why FDM suits shop-floor tooling

Lead time

A machined aluminium fixture typically needs a drawing, a quote, a machine slot and finishing. An FDM fixture goes from STL to finished part in days: printing and QC usually take 1-3 days depending on queue and order size, plus 3-5 business days of delivery. If the first version is wrong, the second costs another print, not another machining job.

Shapes that are hard to machine

FDM does not care whether a pocket is square or follows the exact contour of a moulded housing. Fixtures can cradle complex parts, include ergonomic finger grips for operators and use internal channels for cable routing. Hollow or ribbed interiors keep large fixtures light, which matters when an operator handles them hundreds of times a shift.

Labelling built in

Part numbers, station IDs, orientation arrows, "THIS SIDE UP" and revision codes can be embossed or debossed directly into the print. Colour coding by line or product variant is a simple filament choice. Labels that are part of the geometry do not peel off.

Easy replacement

Because the fixture is a file, a worn or broken one can be reordered identically. With batch production, a set for multiple stations or plants is printed with consistent settings and colour.

Choosing the right material

Material choice follows the job the tool does. The full comparison is in our engineering materials guide; for tooling, the short version is:

FDM materials for jigs, fixtures and assembly aids
MaterialStrengthsTypical tooling usesWatch out for
PLA-CFStiff, dimensionally stable, matte finishLocating fixtures, drill guides, gauges, inspection nestsMore brittle than PETG; avoid thin snap features
PETGTough, some flex, good chemical resistanceAssembly nests, clips, trays, aids that get droppedLess stiff than PLA-CF; can creep under constant load
TPUFlexible, grippy, absorbs impactSoft jaws, protective pads, bumpers, non-marking contact facesNot for locating features that must hold position
PLALow cost, prints accuratelyTemplates, trial versions, low-load guidesSoftens with heat; not for warm environments

A common pattern is a hybrid: a stiff PLA-CF body that locates the part, with TPU pads in the contact areas so cosmetic surfaces are not scratched. Print the two separately and fasten or press-fit them together.

Design tips for durable printed tooling

Printed tooling fails at the same few places: worn locating features, cracked thin walls and stripped screw holes. These general practices address most of them. Our design for FDM guide covers the fundamentals in more depth.

  • Use metal where wear happens. Press in steel dowel pins for locating, and use drill bushings in drill jigs. The printed body holds the metal parts in position; the metal takes the wear.
  • Use heat-set inserts for screws. Threaded brass inserts, installed with a soldering iron after printing, are standard practice for any screw that is tightened more than a few times. Self-tapping into plastic wears out quickly.
  • Chamfer entry edges. A chamfer or lead-in on nests and pockets helps operators load parts quickly and stops sharp edges chipping.
  • Add ribs, not mass. Ribs and gussets add stiffness at a fraction of the material and print time of solid sections.
  • Orient for load. FDM parts are weaker between layers. Orient the print so the main load runs along the layers, and say so in your brief if you are unsure.
  • Allow clearance and test. Nests usually need a small clearance around the part. Print a short test section first for critical fits rather than assuming a number.
  • Use high infill for working areas. Clamping faces and areas around inserts benefit from higher infill and more perimeters. You can set infill from 5% to 100% in the quote.

When to stay with metal

Printed tooling is not a universal replacement. Machined steel or aluminium is still the right choice when:

  • Heat is involved. Welding fixtures, tooling near ovens, reflow or hot-melt processes will soften FDM plastics.
  • Forces are high. Clamping for heavy machining, press operations and anything carrying significant structural load.
  • Tolerances are tight and must hold. Precision datums and calibrated gauges need materials that stay dimensionally stable over time. FDM parts can be checked and adjusted, but they are not a substitute for calibrated metrology tooling.
  • Abrasion is constant. Parts sliding against the fixture all day will wear plastic quickly unless you add metal wear strips.
  • Solvents or aggressive chemicals are present. Check compatibility before committing to a plastic.

Many teams start with a printed version to prove the concept and the ergonomics, then machine only the fixtures that genuinely need metal. The printed trial also serves as a precise reference for the machinist.

Ordering printed tooling

For individual jigs and fixtures with STL files ready, upload them for an instant online quote and choose material, layer height and infill. Tick "Need help deciding?" if you want the team to recommend settings. Larger builds within 256 x 256 x 256 mm print in one piece, and bigger fixtures can be split and joined.

For tooling sets across several stations, repeat orders or projects under NDA, visit our business page or talk to the team about a custom quote.

Frequently asked questions

Which material is best for 3D printed fixtures?

PLA-CF is a good default for stiff locating fixtures and gauges, PETG for aids that need toughness or get dropped, and TPU for soft jaws and pads. Many fixtures combine a stiff body with TPU contact pads.

Can I use screws in a printed jig?

Yes. Heat-set brass inserts are the usual approach for screws that will be tightened repeatedly, because threads cut directly into plastic wear out quickly.

Will a printed fixture last as long as a machined one?

Usually not in high-wear or high-heat roles, but for assembly aids, nests and templates it can last a long time. Adding metal pins or bushings at wear points extends life, and a worn part can be reprinted from the same file.

Can you print identical fixtures for several stations?

Yes. Batch production runs identical parts with consistent settings and colour, and volume discounts apply automatically in the quote.

Have parts to print?

Upload an STL for an instant price, or talk to us about batch runs and NDA projects.

Business enquiries
Get instant quote